Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Austin?
Metal roof installation in Austin, TX typically costs between $14,500 and $38,000 for a standard single-family home in 2026, with most homeowners paying around $22,000 to $26,000 for a standing seam metal roof on a 1,800-square-foot house. That works out to roughly $8 to $21 per square foot installed, depending on the metal type, roof pitch, and whether the old roof has to come off first. At Mercer Roofing Co Austin, we put that price in writing before any work starts, so you know exactly what you’re getting into.
Here’s the honest summary: metal roofing costs about two to three times what asphalt shingles cost upfront. But a properly installed metal roof in Central Texas routinely lasts 40 to 60 years, while asphalt shingles in Austin’s heat often need replacement in 15 to 20 years. The math changes when you plan to stay in the home long term.
Metal Roof Installation Cost Breakdown (2026)
The table below reflects what we’re seeing across Austin neighborhoods in 2026, from Allandale to Mueller to Circle C Ranch. These are installed prices, materials and labor included.
| Cost Component | Typical Range (Austin, 2026) | Notes |
|---|---|---|
| Metal panels (standing seam, steel) | $5.50 – $9.00 per sq ft | 26-gauge steel; 24-gauge runs higher |
| Metal panels (stone-coated steel) | $6.50 – $11.50 per sq ft | Decra or similar; heavier, hail-resistant profile |
| Underlayment (high-temp rated) | $0.75 – $1.50 per sq ft | Austin heat demands synthetic, not felt |
| Tear-off of existing roof | $2.00 – $4.00 per sq ft | Disposal and haul-off included |
| Decking repair or replacement | $75 – $125 per sheet | Often needed on 20+ year old Austin homes |
| Flashing and trim | $1,200 – $3,500 total | Valleys, eaves, pipe boots, ridge caps |
| Labor (Austin metro rates) | $3.00 – $5.50 per sq ft | Varies with roof pitch and complexity |
| Permits | $250 – $700 | City of Austin residential reroof permit |
For a 1,800-square-foot home, those numbers land between $16,000 and $34,000 all-in for a standing seam steel roof installed over existing decking, with the tear-off included. Stone-coated steel, which handles Austin hail better than anything else we install, runs $21,000 to $41,000 on the same house.
A few things push the number up or down. A single-story ranch in Leander with a simple gable roof comes in at the low end. A two-story home in Tarrytown with valleys, dormers, and a 8/12 pitch runs higher. The roof pitch matters because steeper roofs slow the crew down and require safety rigging. Complexity like skylights, chimneys, and vent pipes adds flashing labor. And if the existing deck has water damage, which we find often on older Austin homes with original wood shake or early composite shingles, that gets addressed before metal goes down.
What Affects Metal Roof Installation Pricing in Austin
- Metal type and gauge. Standing seam steel in 26-gauge is the workhorse and the best value for most Austin homes. Going to 24-gauge adds 10 to 15 percent but gives you better hail resistance. Aluminum costs more than steel but is worth looking at if you’re within a mile of a corrosive environment like a swimming pool-heavy area or industrial zone. Copper and zinc are beautiful, but at $25 to $45 per square foot, they’re a different conversation entirely.
- Roof pitch. Austin’s older neighborhoods like Hyde Park and Bouldin Creek have some genuinely steep roofs, often 8/12 or steeper on the craftsman-style homes. Anything over 6/12 requires additional safety equipment and slows installation, which shows up in the labor line. Flat or low-slope roofs on mid-century moderns in Allandale take a different metal system entirely.
- Hail history and insurance. Austin sits in a hail-prone corridor. Homes in Round Rock, Pflugerville, and northern Austin get hit harder and more often than South Austin. If you’ve had a hail claim in the past five years, your insurance may cover part of a metal roof upgrade, but only if you use impact-rated materials and document the damage properly. Stone-coated steel usually qualifies for the best insurance credits.
- Existing roof condition. If the decking is solid and the old shingles can be torn off cleanly, you save money. If the roof has multiple layers, which we sometimes find on homes built before 1990 that never had a full tear-off, disposal costs go up. Water-damaged decking around chimneys and skylights is common on Austin homes that lived through the 2015 and 2018 hail seasons without repairs.
- Neighborhood and access. Tight lots in older central neighborhoods like Travis Heights and Clarksville mean the crew may not be able to park a dump trailer next to the house. That adds labor for material handling. Newer subdivisions with wide streets and flat driveways are easier and cheaper. Steep or heavily treed yards also slow things down, and Austin has some genuinely steep lots in the Westlake and Northwest Hills areas.
- Permit requirements. The City of Austin requires a residential reroof permit for most metal roof installations. Permit fees run $250 to $700 depending on the project valuation, and the city sends an inspector to check underlayment before panels go on in some cases. Georgetown, Cedar Park, and the other suburbs have their own permitting processes with different fee schedules.
How to Save on Metal Roof Installation
The biggest way to save is to plan the project during the slower season. Austin roofing crews are typically lightest in late summer and early fall, after the spring storm rush and before the fall rush starts. You won’t get a discount for urgency, but scheduling flexibility often translates to better scheduling windows and a smoother process.
A second practical move: get the roof inspected before you sign anything. At Mercer Roofing Co Austin, we walk the roof with you, document what we find, and give you a written price based on what’s actually there, not what we assume is there. That means no surprise charges for decking repair that gets discovered mid-project. The price you approve is the price you pay, because the inspection already caught what a lot of companies find later and bill extra for.
And here’s a thing about insurance: if your current roof has hail damage from a recent storm, your homeowner’s policy may cover the tear-off and the cost of a comparable replacement, with you paying the difference to upgrade to metal. We’ve helped homeowners in Pflugerville, Round Rock, and Leander navigate that process dozens of times. The key is getting the damage documented by an inspector who knows how to work with adjusters, and filing the claim within the policy window.
We also don’t try to sell you on metal if the math doesn’t work for your situation. If you’re selling the house in three years, metal probably isn’t the highest-value move. If you’re staying for a decade or more, it usually is. A free estimate from our metal roof installation team in Austin includes the full breakdown so you can make that call with real numbers. Call (361) 202-8874 and you’ll get a live person, not a voicemail, and we’ll set up a walkthrough at a time that works for you.
Metal Roof Types and What They Cost in Austin
Not all metal roofs are the same product, and the price differences are substantial. Here’s what we install most often in the Austin area and what homeowners pay.
Standing Seam Steel ($8 – $14 per sq ft installed)
This is what most people picture when they think “metal roof.” Raised vertical seams run from ridge to eave, with concealed fasteners underneath. It’s the cleanest look and the most common choice in neighborhoods like Mueller, where the modern architecture calls for clean lines. We install a lot of 26-gauge standing seam. The concealed fastener system means fewer penetrations in the metal, which means fewer leak points over time.
Stone-Coated Steel ($11 – $19 per sq ft installed)
Stone-coated steel looks like shingles, shakes, or tile from the street, which makes it popular in HOA-governed areas or neighborhoods like Circle C where the aesthetic is more traditional. It’s also the best-performing material we install for hail resistance. The stone coating absorbs impact, and in many cases, homeowners qualify for an insurance premium discount after installation. The product weight is comparable to asphalt, so it rarely requires structural reinforcement.
Exposed-Fastener Metal Panels ($6 – $9 per sq ft installed)
This is the agricultural-style ribbed panel you see on barns and workshops. It’s the cheapest metal roof option and perfectly functional, but the exposed screws need re-tightening and gasket replacement over time. For a residential home in Austin, we usually steer people toward standing seam for the long-term performance, but for a detached garage, workshop, or covered patio, exposed-fastener panels are a smart budget move.
Aluminum Shingles or Panels ($9 – $16 per sq ft installed)
Aluminum costs more than steel but resists corrosion better in specific situations. If your home is within a mile of a large body of water, a heavily chlorinated pool, or an industrial zone, aluminum is worth considering. Most Austin homes don’t need it, which is why it’s not our default recommendation. But for the right property, it’s the correct material.
Is Metal Roofing Worth It in Austin’s Climate?
This is the question that actually drives the decision, and the answer in Austin is more straightforward than in most markets. Metal roofing reflects solar heat, which reduces attic temperatures by 30 to 50 degrees Fahrenheit in August. That’s not marketing language; that’s what we measure with infrared thermometers on completed installs in July and August. Lower attic temperatures mean your HVAC system runs less, and in Austin summers, that’s a real utility bill difference.
The other factor is hail. Austin and the surrounding corridor through Round Rock, Hutto, and Taylor get regular hail events. A standard asphalt shingle roof takes damage from 1.5-inch hail. Standing seam steel handles 2-inch hail without denting in many cases, and stone-coated steel handles even more. After a major hailstorm, the neighborhoods with metal roofs are the ones not filing claims. That matters over a 20-year horizon.
And then there’s the longevity math. An asphalt shingle roof in Austin’s UV blast lasts 15 to 20 years if it’s a quality product installed correctly. Metal lasts 40 to 60. If you plan to own the home for more than 10 years, metal is often the cheaper roof per year of service. The upfront premium is real, but the replacement cycle for asphalt in this climate is also real.
What Happens During a Mercer Roofing Metal Installation
We think you should know exactly what to expect, because the process matters as much as the price. Every Mercer job starts with the written price. Before any nail is driven, you have a line-item estimate and the 365-Day Done Right Promise in writing. That promise covers the workmanship for a full year, and if something isn’t done right, we make it right. Every repair we do carries the same written guarantee, with a free second visit if a repair fails.
On installation day, the crew arrives in clean, marked uniforms, and every technician carries a photo ID badge. We send you the name and photo of each technician before they arrive, so when the doorbell rings, you know exactly who’s on the other side. That’s the Threshold Verified standard, and it’s not optional for us. Every Mercer location is contractually held to it as part of the Threshold Group family of home-service companies, which was founded in 2000.
The installation itself follows a specific sequence: tear-off of the old roofing, inspection and repair of the decking, high-temperature synthetic underlayment, then the metal panels with flashing at every penetration. The city inspector typically checks the underlayment before panels go on, depending on your permit. We walk you through the whole sequence before we start, and we don’t leave the job until the site is clean and you’ve had a chance to look at the finished roof with the crew lead.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost on a 1,500 sq ft house in Austin?
For a 1,500-square-foot home in Austin, a standing seam steel roof typically runs $13,500 to $28,000 installed, including tear-off of the existing roof. Stone-coated steel on the same house runs $17,000 to $34,000. The range depends on roof pitch, number of penetrations, and current decking condition. Call (361) 202-8874 for a written estimate on your specific home. The estimate is free, and a live person answers.
Is metal roofing more expensive than shingles in Austin?
Yes. Metal roofing in Austin costs roughly two to three times what architectural asphalt shingles cost. Asphalt shingle installation in Austin runs $5.50 to $8.50 per square foot installed, while metal runs $8 to $21 per square foot installed. The trade-off is lifespan: 40 to 60 years for metal versus 15 to 20 years for asphalt in Austin’s climate.
Does a metal roof increase home value in Austin?
A metal roof typically adds $15,000 to $30,000 to a home’s resale value in the Austin market, based on appraisals we’ve seen on homes in neighborhoods like Mueller, Allandale, and Steiner Ranch. Appraisers and buyers recognize the longevity and hail resistance. The exact number depends on the metal type, the roof’s age at sale, and the comparable homes in the area.
How long does a metal roof last in Austin?
A standing seam steel roof in Austin lasts 40 to 60 years with proper installation and periodic inspection. Stone-coated steel carries similar lifespans. The Austin-specific risks are UV degradation of fasteners and sealants, which is why we recommend an annual visual inspection and re-sealing of any exposed fastener systems every 10 to 15 years. Standing seam roofs with concealed fasteners need less attention.
Will my insurance cover a metal roof in Austin?
If your current roof has hail or storm damage, your insurance policy may cover the cost of a comparable replacement, which you can apply toward a metal roof upgrade and pay the difference. Many Austin homeowners in hail-heavy areas like Round Rock, Pflugerville, and Hutto have used this path. Stone-coated steel often qualifies for insurance premium discounts after installation. We recommend documenting the damage and contacting your insurer before starting any work.
Can Mercer Roofing install a metal roof in one day?
For most Austin single-family homes, the full tear-off and metal installation takes 3 to 5 working days. Smaller detached garages or workshops can often be done in one day. The city inspection process adds time between underlayment and panel installation on some permits, which is common across the Austin metro. We’ll give you a clear timeline in the written estimate before any work starts.
Get a Written Metal Roof Estimate in Austin
If you’re considering a metal roof on your Austin home, the next step is a walkthrough and a written price. You can reach us at (361) 202-8874 any time, day or night, and a live person picks up. We’ll schedule a time for one of our background-checked, photo-badged technicians to inspect your roof, answer your questions honestly, and put the numbers in writing before you commit to anything.
Grant Whitlock leads our Austin location, and the standard is simple: you know who’s coming to your door, the price is set before work begins, and the guarantee is in writing for 365 days after the job is done. If you’d rather compare options first, that’s fine too. The estimate tells you everything you need to make the decision.
Written by Grant Whitlock, Owner at Mercer Roofing Co Austin, serving Austin since 2000. Grant leads every project through the Threshold Verified standard: background-checked technicians, photo ID at the door, and written pricing before any work starts.
Pricing reflects the Austin market as of 2026. Mercer Roofing Co Austin offers free estimates – call (361) 202-8874.
What Our Customers Say
"Replaced the ridge cap and drip edge, and fixed a sagging gutter that nobody else mentioned. Fair price."
- Phil N."Chimney flashing was the culprit for years of dark stains on the ceiling. Fixed it in one visit and no more stains."
- Ian O."Honest inspection. He went up, took photos, and told me I had maybe five more years instead of selling a full replacement."
- Xavier L.