Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Atlas Roofing Company in Austin: What to Know First
Mercer Roofing Co Austin repairs and replaces Atlas roofing systems throughout Austin as an independent Atlas service provider. Most Atlas roof repairs in our area run between $350 and $1,400 depending on what failed, and we usually complete standard repairs the same day we diagnose them. Before any work starts, you get a written price, and every repair leaves with a 365-day written guarantee.
If you own a home in Austin with Atlas shingles and you’re seeing granule loss, lifted tabs, or leaks near flashing, this page tells you what’s actually going on and what it costs to fix. Call (361) 202-8874 and a live person answers, not a voicemail.
How Atlas Products Fail – and How We Fix Them
- Atlas StormMaster Slate granule wash-off after hail. Hail strikes in Austin, especially through Zilker and the western hill neighborhoods, knock the ceramic-coated granules off StormMaster Slate shingles faster than most owners expect. It’s not a manufacturing defect; it’s physics on a steep pitch. We document the loss, check for fractured mat underneath, and replace full slopes when the granule loss crosses about 30% of the shingle face. Partial replacements look terrible and fail early.
- Atlas Pinnacle Pristine sealant strip release on south-facing roofs. The self-seal adhesive on Pinnacle Pristine shingles can release under prolonged direct Texas sun, particularly on south and west exposures that bake all afternoon. When tabs lift, wind gets under them and the roof ages years in a single storm season. We hand-seal the lifted tabs with a manufacturer-compatible adhesive and inspect the entire slope, not just the tabs you saw from the street.
- Atlas GlassMaster curling at eaves near unventilated soffits. We see GlassMaster 3-tab shingles curling at the bottom edge on older Austin homes where soffit ventilation is blocked or missing. The trapped attic heat cooks the shingles from the underside. Replacing the curled shingles fixes the symptom; we also flag the ventilation issue so you don’t replace the same eave every three years.
- Atlas ProLam ridge cap splitting at the peak. Ridge cap shingles on Atlas ProLam roofs take the most UV and wind at the highest point of the house. We regularly find cracked cap where two cap pieces meet, letting water run straight into the ridge. We pull the cracked cap, inspect the underlayment beneath it, and rebed new cap pieces with proper fastening. It’s a small repair that prevents a big ceiling stain.
- Atlas AC Foam flat-roof blistering after heavy rain. Austin’s sudden downpours followed by 100-degree days are brutal on low-slope Atlas AC Foam systems. Blisters form when trapped moisture expands under the foam, then split open and create entry points. We cut out the blistered foam, dry the area fully, and re-foam in lifts. Skipping the drying step is why blisters come back; we don’t skip it.
Styles & brands we work with
Our Atlas Roofing Company Process
- 1
You call, a person answers. No phone tree. We ask what you’re seeing, when it started, and whether you’ve had any recent storms. Then we schedule the visit and send you the name and photo of your technician before they ring the bell.
- 2
The technician badges in. Every Mercer Roofing Co Austin technician is background-checked, identity-verified, arrives in a clean marked uniform, and shows you a photo ID at the door. The Threshold Verified standard isn’t a slogan; it’s how we run every visit.
- 3
We walk the roof and document what we find. Grant Whitlock taught the crew to photograph everything, explain it in plain English, and never invent work. You see the same photos we see.
- 4
You get a written price before any work starts. Parts decision included: we use Atlas OEM materials when the warranty or the slope calls for them, and we recommend quality aftermarket flashing and underlayment where it performs equal or better for less money. You approve every line item.
- 5
We do the repair, clean up, and test. For leak work, we run water on the repaired area before we leave whenever the job allows. If it holds, we photograph the finished work.
- 6
You get the 365-Day Done Right Promise in writing. If the repair fails within a year, we return and fix it free.
See the difference
Before
After
Before
After
Before
AfterWhat Atlas Roofing Company Costs in Austin
Atlas repair pricing in Austin depends more on what failed than on who you call. Here’s what we typically quote:
- Ridge cap repair: $180 – $400
- Flashing replacement around a chimney or vent: $300 – $800
- Small leak repair with decking patch: $450 – $1,100
- Full slope replacement (10 – 15 squares): $4,500 – $9,000
- Complete Atlas re-roof on an average Austin ranch: $12,000 – $22,000
What moves the price: roof height, pitch, number of penetrations, decking condition, and whether we’re matching Atlas architectural shingles or replacing a line that’s been discontinued. Some older Atlas color blends aren’t made anymore, so we’ll talk honestly about whether a section replacement will match or whether a full re-roof makes more sense. Call (361) 202-8874 for a free estimate with a written, line-by-line price.
Why Austin Homeowners Call Mercer Roofing Co Austin for Atlas Work
We know Atlas roofs because we work on them every week, not because we read a brochure. But the bigger reason people call us is how we show up. Every technician’s name and photo arrives before the visit. They badge in at your door with a photo ID. The price is written before a single nail is pulled, and the guarantee is for 365 days, in writing, on every repair.
We also work with GAF, Owens Corning, and CertainTeed products, which matters when an Atlas line has been discontinued and you need an honest recommendation on a substitute. Mercer Roofing Co Austin is part of the Threshold Group family, founded in 2000, and each of our locations is independently owned and operated under Threshold Verified standards. Your roof shouldn’t be something you worry about – that’s what we’re here for.
FAQs
No. As an independent Atlas service provider, we use Atlas OEM materials when the warranty terms require them, and we keep documentation of every repair so your warranty record stays intact. A third-party repair done correctly does not void the shingle warranty, but we’ll walk you through what Atlas covers and what it doesn’t so there are no surprises.
We typically schedule most Austin Atlas repairs within a few days of your call, and for active leaks we’ll work to get a technician out the same day when our schedule allows. Call (361) 202-8874 and a live person will tell you exactly when we can be there.
Repair makes sense when the failure is localized: a single flashing point, a few lifted tabs, a split ridge cap. Replacement makes sense when the shingles have lost most of their granules, the decking is soft, or you have leaks in multiple rooms. We’ll give you the honest math in writing, and we don’t pad the answer toward the bigger job.
Both, chosen deliberately. We use Atlas OEM shingles and accessories when warranty compliance or color matching matters. For underlayment, flashing, and fasteners, we use manufacturer-approved aftermarket materials that often outperform the original spec for less money. You see the line items and approve them before we start.
The 365-Day Done Right Promise covers it. If the repair doesn’t hold within a year, we come back and make it right at no charge. It’s in writing, it’s included with every repair, and it’s not conditional on anything.
Written by Grant Whitlock, Owner, Mercer Roofing Co Austin at Mercer Roofing Co Austin, serving Austin and nearby areas.